M42club.com - Home of the BMW E30/E36 318i/iS

FAQ / REFERENCE => How-To's => Topic started by: jmsra on May 31, 2015, 06:10:41 PM

Title: Fender Screws
Post by: jmsra on May 31, 2015, 06:10:41 PM

Would anyone know the part number for these screws.(http://)
Forum search has nothing and Google has a few on ebay but no part numbers.
Any help is much appreciated.

Title: Re: Fender Screws
Post by: Slowered318 on June 01, 2015, 06:25:42 AM

Pretty sure they are NLA from BMW.

Title: Re: Fender Screws
Post by: deansweet on June 01, 2015, 07:47:50 PM

Hard to tell how fat the disks are in your picture but this appears to be close?
http://www.ebay.co.uk/itm/BMW-E30-E32-Bumper-Mounting-Bracket-Torx-Bolt-1908404-51121908404-/291451134895?pt=LH_DefaultDomain_3&hash=item43dbd763af (http://www.ebay.co.uk/itm/BMW-E30-E32-Bumper-Mounting-Bracket-Torx-Bolt-1908404-51121908404-/291451134895?pt=LH_DefaultDomain_3&hash=item43dbd763af)

(http://i.ebayimg.com/00/s/MTI0NFgxNjAw/z/N-cAAOSwqu9VRP15/$_57.JPG)
There's an old '87 325 at the junk yard by me.
Next time I am there I will see if I can grab a few(or all of them?)...

Dean

Title: Re: Fender Screws
Post by: jmsra on June 02, 2015, 07:59:55 PM

Thanks for the info Deansweet. I believe those attach the inner bumper support to the metal brackets which then get bolted to the bumper shocks.
The ones I'm looking for help the fender capture the valance below the headlight.
The torx screw comes up from below and the standard 8mm hex from the top as shown in this pic.
(http://)