M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Swaps, Turbos, Buildups => Topic started by: naikaFR on June 06, 2014, 02:27:19 PM

Title: Specs on m42 plenum for turbo set-up
Post by: naikaFR on June 06, 2014, 02:27:19 PM

Hi guys
I currently have an m62 swap in my 318is but i recently decided to swap back an m42 in it ;)
I am looking at building a serious turbo set-up with a friend of mine of is a pro welder and can build many parts for me and his m42 ;)
I have taken a look at many plenum design but haveńt found any info on dimensions
, specs anywhere.
Is there a post or a member that is willing to share info?
I am planning on build a serious engine possibly with a stroker and cutom made exhaust manifold and plenum
Any info would be appreciated as i'd rather ather info before starting
Thanks a lot

Title: Re: Specs on m42 plenum for turbo set-up
Post by: naikaFR on June 09, 2014, 02:28:22 PM

Bump
Anyone willing to share some info?
Thanks
Franck

Title: Re: Specs on m42 plenum for turbo set-up
Post by: romkasponka on June 09, 2014, 04:01:39 PM

(http://www.miataturbo.net/attachments/diy-turbo-discussion-14/11836d1242312802-intake-manifold-design-question-evowrc4-jpg)

(http://www.dahlbackracing.se/images/Parts/insug/797.jpg)

This style plenums are used in WRC cars and it delivers the same amount of air and fuel to all cylinders.