M42club.com - Home of the BMW E30/E36 318i/iS

PAPER OR PLASTIC => For Sale => Topic started by: bflan2001 on March 31, 2014, 11:39:48 AM

Title: FS: TURBO PARTS! Rebuilt M42 head, Cometic MLS head gasket, BEGI FPR, etc.
Post by: bflan2001 on March 31, 2014, 11:39:48 AM

Scrapping a turbo build that I never got off the ground, here are a few of the parts for sale. All parts are brand new unless otherwise noted.

1. Freshly rebuilt cylinder head with dual valve springs and ceramic coating - $500[COLOR="#FF0000"]SOLD[/COLOR]

2. Cometic MLS head gasket - $140[COLOR="#FF0000"]SOLD[/COLOR]

3. BEGI 2025 rising rate fuel pressure regulator (used) - $80[COLOR="#FF0000"]SOLD[/COLOR]

4. Raceware main bearing stud kit - $130[COLOR="#FF0000"]SOLD[/COLOR]

5. Raceware head stud kit - $130[COLOR="#FF0000"]SOLD[/COLOR]

6. Lightweight hydraulic lifters for higher redline - $150[COLOR="#FF0000"]SOLD[/COLOR]

7. E21 323i Euro flywheel, only 13lbs! (used) - $150[COLOR="#FF0000"]SOLD[/COLOR]

I also have several more parts that I'll be posting up in the next couple weeks. These are the turbo-specific parts, the rest are just general rebuild parts like gasket sets, oil pump, water pump, fan w/clutch, etc. etc.

Title: Re: FS: TURBO PARTS! Rebuilt M42 head, Cometic MLS head gasket, BEGI FPR, etc.
Post by: bflan2001 on March 31, 2014, 04:38:52 PM

PICS!

(http://i29.photobucket.com/albums/c268/bflan2001/cylinderheadtop.jpg) (http://s29.photobucket.com/user/bflan2001/media/cylinderheadtop.jpg.html)
(http://i29.photobucket.com/albums/c268/bflan2001/cylinderheadbottom.jpg) (http://s29.photobucket.com/user/bflan2001/media/cylinderheadbottom.jpg.html)
(http://i29.photobucket.com/albums/c268/bflan2001/cylinderheadvalvecloseup.jpg) (http://s29.photobucket.com/user/bflan2001/media/cylinderheadvalvecloseup.jpg.html)
(http://i29.photobucket.com/albums/c268/bflan2001/cylinderheadchambercloseup.jpg) (http://s29.photobucket.com/user/bflan2001/media/cylinderheadchambercloseup.jpg.html)
(http://i29.photobucket.com/albums/c268/bflan2001/CometicMLSgasket.jpg) (http://s29.photobucket.com/user/bflan2001/media/CometicMLSgasket.jpg.html)
(http://i29.photobucket.com/albums/c268/bflan2001/CometicMLSgasketlabel.jpg) (http://s29.photobucket.com/user/bflan2001/media/CometicMLSgasketlabel.jpg.html)
(http://i29.photobucket.com/albums/c268/bflan2001/racewareheadstuds.jpg) (http://s29.photobucket.com/user/bflan2001/media/racewareheadstuds.jpg.html)
(http://i29.photobucket.com/albums/c268/bflan2001/racewaremainstuds.jpg) (http://s29.photobucket.com/user/bflan2001/media/racewaremainstuds.jpg.html)

Title: Re: FS: TURBO PARTS! Rebuilt M42 head, Cometic MLS head gasket, BEGI FPR, etc.
Post by: Slowered318 on April 01, 2014, 06:15:21 AM

Might be interested in some of the turbo specific parts.

Title: Re: FS: TURBO PARTS! Rebuilt M42 head, Cometic MLS head gasket, BEGI FPR, etc.
Post by: Darky on April 01, 2014, 06:19:16 AM

Hello
What is the mass of the lifters?
Water pump?
Cheers Rohan

Title: Re: FS: TURBO PARTS! Rebuilt M42 head, Cometic MLS head gasket, BEGI FPR, etc.
Post by: bflan2001 on April 01, 2014, 10:04:37 AM

Slowered, let me know what you're interested in. Right now I have someone interested in the flywheel and cylinder head.

Darky, The lifters weight about 49 grams. Stock E30 M42 lifters are 78 grams & E36 lifters are 68 grams, so it's a pretty significant difference. It makes the engine even more rev happy and raises the redline by a few hundred RPMs.

Title: Re: FS: TURBO PARTS! Rebuilt M42 head, Cometic MLS head gasket, BEGI FPR, etc.
Post by: Darky on April 01, 2014, 10:35:59 PM

Hi
Lifters done, but whose are they vw are 56g thereabouts.
What sort of oil pump and relief are you using 44 or 42?
Water pump?
Cheers

Title: Re: FS: TURBO PARTS! Rebuilt M42 head, Cometic MLS head gasket, BEGI FPR, etc.
Post by: Slowered318 on April 02, 2014, 07:32:24 AM

Quote from: bflan2001 on April 01, 2014, 10:04:37 AM

Slowered, let me know what you're interested in. Right now I have someone interested in the flywheel and cylinder head.

All I have currently is giant space for the turbo where I've relocated the washer fluid and ignition coils. Looking to gather up the manifold, turbo, intercooler, pipe/hose/fittings and injectors this year. Still researching and watching the other builds in progress.