M42club.com - Home of the BMW E30/E36 318i/iS

PAPER OR PLASTIC => For Sale => Topic started by: murky024 on September 14, 2013, 09:06:05 AM

Title: Freshly Rebuilt/Cleaned/Flow Matched Injectors (Mustang/Ford 19lbs)
Post by: murky024 on September 14, 2013, 09:06:05 AM

Set of 4 Bosch 19# yellow Injector. 19.8# @ 3 bar. 21.9# @ 3.5bar. EV1 Design

I purchased 8 Mustang 19lb injectors the following were done to them:
-Fully disassembled
-Cleaned in a chemical bath
-Sonic cleaned
-Impedance Checked
-Flow tested and matched.
-Rebuilt with all NEW components (filters, Viton orings, spacers, etc.)

I only needed 4 so I have the other 4 for sale.

$45 shipped to anywhere in the US.

Edit:
These are pending sale but I want to toss up the pictures in case it falls through.
(http://i79.photobucket.com/albums/j148/murky024/Parts%20For%20Sale/IMG_1404_zpsc65c7df6.jpg)
(http://i79.photobucket.com/albums/j148/murky024/Parts%20For%20Sale/IMG_1402_zpsbe48503a.jpg)

Title: Re: Freshly Rebuilt/Cleaned/Flow Matched Injectors (Mustang/Ford 19lbs)
Post by: jrobie79 on September 16, 2013, 01:06:01 PM

pm'd

Title: Re: Freshly Rebuilt/Cleaned/Flow Matched Injectors (Mustang/Ford 19lbs)
Post by: jwalton on January 01, 2014, 08:15:35 PM

I've read mixed review on putting these in a stock m42.  Does your car feel any different?  I have some stock single pintle ones that I just took out to refresh.