M42club.com - Home of the BMW E30/E36 318i/iS

PAPER OR PLASTIC => For Sale => Topic started by: ClayW on April 23, 2013, 02:20:31 PM

Title: Parting an M42 in Silver Spring, MD
Post by: ClayW on April 23, 2013, 02:20:31 PM
Parting an M42 in Silver Spring, MD

I planned on selling this all together, but some have expressed interest in certain parts, so PM me with what you need/want. Include offers in your PMs!

I removed this M42 because I had intermittent overheating problems. I cannot speak to the quality of the parts; I have not had them checked for cracks, though I can say that there is no obvious damage (no thrown rods, giant fissures in the head or obviously blown head gasket.

Parts List

M42 Block
Pistons
Crank
Rods
Head
Intake Cam SOLD
Exhaust Cam
Cam Gears SOLD
Cam Mains/Bearings
Cam Carriers
Head Bolts
Lifters
Valves
Springs
Flywheel
Clutch/Pressure Plate
Flywheel Bolts
Anything else you see in the picture (or don't), just ask.

 

(http://i119.photobucket.com/albums/o143/clayweiland/1967%201600/M42RampR012_zps90344417.jpg) (http://s119.photobucket.com/user/clayweiland/media/1967%201600/M42RampR012_zps90344417.jpg.html)
Title: Re: Disassembled M42 $100 in Silver Spring, MD
Post by: Matt-B on April 24, 2013, 10:04:44 AM
how much for those sprockets?
Title: Re: Disassembled M42 $100 in Silver Spring, MD
Post by: ClayW on April 24, 2013, 10:40:57 AM
Quote from: Matt-B on April 24, 2013, 10:04:44 AM
how much for those sprockets?

$30 shipped?
Title: Re: Disassembled M42 $100 in Silver Spring, MD
Post by: BeemerDan on April 24, 2013, 11:24:17 AM
Are you willing to sell the flywheel bolts? if so how much?

Thanks!
Dan
Title: Re: Disassembled M42 $100 in Silver Spring, MD
Post by: ClayW on April 25, 2013, 11:53:03 AM
Quote from: BeemerDan on April 24, 2013, 11:24:17 AM
Are you willing to sell the flywheel bolts? if so how much?

Thanks!
Dan

Sure. $20 shipped?
Title: Re: Parting an M42 in Silver Spring, MD
Post by: BeemerDan on April 29, 2013, 08:14:27 AM
Does it have the stock dual mass flywheel?
Title: Re: Parting an M42 in Silver Spring, MD
Post by: ClayW on April 29, 2013, 08:56:35 AM
Quote from: BeemerDan on April 29, 2013, 08:14:27 AM
Does it have the stock dual mass flywheel?

Yes, it does and it's available.
Title: Re: Parting an M42 in Silver Spring, MD
Post by: BeemerDan on April 29, 2013, 10:31:43 AM
PM me about the flywheel bolts please. It won't let me send a message for some reason.

Thanks!
Title: Re: Parting an M42 in Silver Spring, MD
Post by: jdirty on April 30, 2013, 05:54:44 PM
Is the lower pan for sale and oil pickup tube?
Title: Re: Parting an M42 in Silver Spring, MD
Post by: ClayW on April 30, 2013, 08:04:00 PM
Quote from: jdirty on April 30, 2013, 05:54:44 PM
Is the lower pan for sale and oil pickup tube?

Sorry, those are gone (actually, they are being reused in my 1600)
Title: Re: Parting an M42 in Silver Spring, MD
Post by: jdirty on May 01, 2013, 01:21:01 PM
Quote from: ClayW on April 30, 2013, 08:04:00 PM
Quote from: jdirty on April 30, 2013, 05:54:44 PM
Is the lower pan for sale and oil pickup tube?

Sorry, those are gone (actually, they are being reused in my 1600)

Aww. Thanks anyway and GLWS and the 1600!
OT but does your 1600 have a build thread? lol
Title: Re: Parting an M42 in Silver Spring, MD
Post by: ClayW on May 01, 2013, 02:53:02 PM
Quote from: jdirty on May 01, 2013, 01:21:01 PM
OT but does your 1600 have a build thread? lol

Yep.

www.tx02.blogspot.com (http://www.tx02.blogspot.com)