M42club.com - Home of the BMW E30/E36 318i/iS

PAPER OR PLASTIC => For Sale => Topic started by: pmat0 on April 05, 2013, 03:00:06 PM

Title: M42 head
Post by: pmat0 on April 05, 2013, 03:00:06 PM

For sale is the cylinder head off my old engine. Has 188k, engine was pulled due to being too leaky and finding a non leaky, lower miles engine that was cheaper then gaskets.
Engine ran excellent, and for the almost 10,000 miles that i ran it, the temp guage never got above half way. Valvetrain wasn't noisy either, but wasnt silent. The only problem with the head is that a thermostat housing bolt is broke off while pulling the head. There is still a little bolt sticking out. I do not think that it will be hard to extract, i just dont have the tools. $175 + shipping OBO Im located in NE PA
(http://i162.photobucket.com/albums/t259/Pmat1/m42head8_zps5d0256a0.jpg)
(http://i162.photobucket.com/albums/t259/Pmat1/m42head9_zps5997a8c0.jpg)
(http://i162.photobucket.com/albums/t259/Pmat1/m42head6_zps94dfdb52.jpg)
(http://i162.photobucket.com/albums/t259/Pmat1/m42head7_zps7426ef19.jpg)
(http://i162.photobucket.com/albums/t259/Pmat1/m42head5_zpseffeb507.jpg)
(http://i162.photobucket.com/albums/t259/Pmat1/m42head4_zps97bc6c1e.jpg)
(http://i162.photobucket.com/albums/t259/Pmat1/m42head3_zps4b0afe96.jpg)
(http://i162.photobucket.com/albums/t259/Pmat1/m42head2_zpsdcead6e5.jpg)
(http://i162.photobucket.com/albums/t259/Pmat1/m42head1_zps6cf8ea90.jpg)

Title: Re: M42 head
Post by: pmat0 on May 07, 2013, 01:08:37 AM

bump. 180 shipped obo

Title: Re: M42 head
Post by: pmat0 on May 15, 2013, 02:22:59 AM

bump, $160 shipped

Title: Re: M42 head
Post by: e3091318is on May 15, 2013, 03:23:13 AM

I might be interested in those sensors on the side.  I know one is a coolant temp sensor, but what is the other?  I am in the process of rebuilding my engine.

Title: Re: M42 head
Post by: pmat0 on May 15, 2013, 01:24:14 PM

Pretty sure they are both coolant temp sensors, one for the ECU, and one for the gauge. Someone correct me if i am wrong please.

Title: Re: M42 head
Post by: e3091318is on May 15, 2013, 10:46:17 PM

Quote from: pmat0 on May 15, 2013, 01:24:14 PM

Pretty sure they are both coolant temp sensors, one for the ECU, and one for the gauge. Someone correct me if i am wrong please.

Yea I may take those off if you want to part it out on those.  Do you know if they were both in working condition?

Title: Re: M42 head
Post by: jls8177 on July 04, 2013, 08:34:59 PM

Still available? I might be interested. I live near Baltimore.

Jason
443-306-3540