M42club.com - Home of the BMW E30/E36 318i/iS
PAPER OR PLASTIC => For Sale => Topic started by: e30Andym42 on May 31, 2012, 01:34:12 PM
-
I have a few spare e30 parts lying around I'm sick of cluttering up my basement. PM me with any questions/concerns and I'll be happy to answer. I can also provide as many pictures as you'd like of whatever you'd like to see on the parts. Make me an offer, I don't want to look at this stuff anymore
Stock e30 Springs and Rear Shocks - $20 or b/o + shipping
I have all four springs in good working order. The front shocks were cut open when the shop cut off the stock housing, so they clearly don't work. I have two rear shocks in good working order as well. All components have some degree of surface rust. There was no problem with the shocks or springs whatsoever, I just upgraded to BC Racing coilovers. There were no strange noises or vibrations or the like. Rear shock mounts were perfectly fine before they removed them.
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN3640.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN3641.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN3644.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN3645.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN3646.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN3647.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN3648.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN3649.jpg)
Stock Alpine Plastic Bumper with sidemarkers and turn signals *DAMAGED* - $3 + shipping
Slid into a parked car in the winter of 2009. Has bulbs in the turns, no bulbs in the sidemarkers. Has all male connections except for the left front sidemarker. Took it off and a cat played with it or something, so I might be able to find it, but no guarantee on that. Turn signal lenses both have minor cracks in them, and the rear edge of the right side sidemarker is broken off. The broken section of plastic is held on by duct tape for true baller status
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0922.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0924.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0927.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0929.jpg)
Quarter for size reference
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0932.jpg)
Stock US sealed beam headlights - $30 + shipping
Painted the trim rings black, but the paint has a couple chips. All lights still work well. The mounting brackets have a little surface rust, everything lines up properly. I probably have the sealed beam pigtails if you want them.
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0918.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0919.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0920.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0921.jpg)
4x100 14inch steelies - $50 or b/o + shipping
Got these with a set of tires I bought locally. Have no need for a third set of rims. Typical steelies... Have some surface rust, nothing bad. Also have 3 nine-spoke acura hubcaps if desired, cuz having four makes too much sense.
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0899.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0933.jpg)
-
Stock e30 318is muffler - $40 b/o + shipping
In good shape, no leaks. Replaced it with a Magnaflow. Also have mounting brackets and doughnuts. The mounting brackets aren't in the best shape, but still work.
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0898.jpg)
(http://i292.photobucket.com/albums/mm26/e30Andym42/DSCN0894.jpg)
-
bump
Make any offer on anything!! Need this stuff out of my basement.
-
Hi,
I left a message in your P.M box. Let me know.
-
I'll buy the muffler if it's still for sale. Please let me know
Grabau@gmail.com
-Alex
-
Is the passenger rear bumper trim still good? Price shipped to Stanwood, Wa. 98292?