M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Engine management => Topic started by: Damon in STL on May 27, 2012, 04:12:34 PM

Title: Need Base .msq
Post by: Damon in STL on May 27, 2012, 04:12:34 PM

Hi,

Does anyone have a base .msq file using EDIS4 they could share?  I've got my base code from my s14 usint a 30-1 wheel....and I've not figured out how to change it to the 60-2 wheel.

TIA

Damon in STL

p.s.  Once I get the base engine running I am going to install my turbo components.....so, a base turbo code would also be helpful!  Thanks!

Title: Need Base .msq EDIS4
Post by: Damon in STL on May 28, 2012, 09:18:56 AM

Quote from: Damon in STL;112820

Hi,

Does anyone have a base .msq file using EDIS4 they could share?  I've got my base code from my s14 usint a 30-1 wheel....and I've not figured out how to change it to the 60-2 wheel.

TIA

Damon in STL

p.s.  Once I get the base engine running I am going to install my turbo components.....so, a base turbo code would also be helpful!  Thanks!

Looks like my EDIS system which I had running my s14 is not a plug and play on the M42.  EDIS must have the 30-1 trigger wheel and the stock 60-2 will not drive EDIS4.

Oh well.....back to soldering....

Still would appreciate a base .msq

Damon in STL

Title: Need Base .msq EDIS4
Post by: Damon in STL on May 28, 2012, 10:08:04 AM

Looks like this is the path to take.....


http://www.diyautotune.com/catalog/quadspark-four-channel-ignition-module-p-481.html (http://www.diyautotune.com/catalog/quadspark-four-channel-ignition-module-p-481.html)

Damon in STL

Title: Need Base .msq EDIS4
Post by: Damon in STL on June 05, 2012, 09:06:52 AM

Got the engine running this weekend on MS2 v3.  Added a second ignitor and used the coil pack from the EDIS4 in wasted spark mode.  The ignition and fuel code I'm currently using is from my s14 code.  Still looking for a good M42/M44 base code.

Damon in STL