M42club.com - Home of the BMW E30/E36 318i/iS
PAPER OR PLASTIC => For Sale => Topic started by: JohnHenryE30 on April 24, 2012, 07:54:15 PM
-
I have up for sale a bunch of brand new things I collected for future usage, but Ill sell all as a whole, or separate depending on what your interested in???
GT35 Turbo New Never used
Godspeed 3" openings Inter-Cooler 31X12x3
3" aluminum inter-cooler piping kit-missing one silicone elbow coupler all else ins there new never used- even clamps
BOV and Waste Gate new never used
AEM Digital TRU Boost Controller new never used
Other gauges: all are GodSpeed electronic-oil pressure,boost,air fuel ratio,oil temp., and a turbo timer all new never used in original boxes still.
other little odds and ends like oil feed lines, heat wrap, brand new never used 10" Illuminite(inside lights up with neon blue) Sub woofer in box, two 500 watt japan made amps-new never used, sub wiring audio kit, all new never used.
E30 related items:
Stainless Turbo header for a E30 M42 engine vehicle-new
3" stainless under-body full output design
3" stainless down pipe
Aluminum Blackworks Radiator New never used
I was gonna hold this stuff for future plans with a different vehicle, but will sell all to someone for a fair price. I have a bit over $2k invested for all above.
Please call or text me for any offers or needed information.
806-420-0918
Thank you!
-
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/0424122004.jpg)
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/0424122005.jpg)
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/0424121955.jpg)
-
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/120116_034.jpg)
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/120126_085.jpg)
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/120126_088.jpg)
-
bump.
-
Inter Cooler $200
GT35 Turbo $200
Aluminum 3" Inter-cooler piping with stainless steel clamps and silicone couplers $150
Or for $500 all three underlined listed above.
Will sell the entire kit for $700. It includes Turbo,Inter-cooler with the piping and clamps, Blow Of Valve, Waste Gate, fuel pressure regulator, 255 fuel pump, hoses and oil feed lines,manual boost controller, air fuel ratio gauge, oil pressure gauge, oil temp gauge,boost gauge, and auto turbo timer.
The AEM TRU Boost controller is for sale--cost me close to $300 new. Ill sell for $200 cash.
BMW M42 Stainless Turbo header with 3" down pipe and 3" full length stainless exhaust for sale as package deal $400. The Turbo header alone cost me that price when purchased.
Aluminum Black Works Racing Radiator cost over $400- will sell now for $250, or include with the turbo header,down pipe, and exhaust as package deal for $500.
Make offer or trade for other deals
Please call me at 806-420-0918 if interested, thank you!
~John Henry~
All prices listed exclude shipping charges, buyers must pay that charge as well.
-
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/0426121204.jpg)
-
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/0427121328.jpg)
(http://i281.photobucket.com/albums/kk210/Johnhenry_album/0427121329.jpg)
I have a t3 to t4 adapter flange available as well...
-
bump.
-
Just for the sake of asking, how much for all this stuff, and what else would I need to turbo my e30 M42. I am COMPLETELY green here. Is this the right size turbo for the motor? As a reference, comparing to Schnitzer318is's thread here:
http://www.r3vlimited.com/board/showthread.php?t=147223
what would be required to complete as compared to that build?
thanks,
Tom
-
interested in a running m20? would love to get my hands on that manifold
-
Just for the sake of asking, how much for all this stuff, and what else would I need to turbo my e30 M42. I am COMPLETELY green here. Is this the right size turbo for the motor? As a reference, comparing to Schnitzer318is's thread here:
http://www.r3vlimited.com/board/showthread.php?t=147223
what would be required to complete as compared to that build?
thanks,
Tom
From what I know, a M42b18 engine stock has too high of compression to succeed with high boost...lower compression is better for boosting. Also the GT35 turbo is intended for a V6 or a V8 motor... anything is possible depending on your mechanical skill and fabrication capabilities... I would never advise turbo-charging unless you really "have the bull by its horns."
But this is pretty much a complete kit...missing fuel injector upgrades. I had upgraded to a AEM Tru Boost controller that is better than the manual boost controller offered in this kit...but it alone cost me close to $300. I have it for sale separate new in its box for $200.
Plus shipping on all listed. Willing to sell all for a fair price cheaper than actual cost, but after some time sitting with no buyers, I will separate.
-
interested in a running m20? would love to get my hands on that manifold
If I hadn't sold my E30, possibly... but not at this time interested in another engine.
Would love to sell the Stainless turbo header, or possibly trade... it cost me close to $400... and now has solid 1" extensions for clearance from the valve cover when bolted on an M42b18... fit it perfect for my 1991 E30 318i.
-
well if i can sell this stupid sewing machine i will want to pick that up from you. glws on the rest of this stuff. Awesome deals plague this page
-
well if i can sell this stupid sewing machine i will want to pick that up from you. glws on the rest of this stuff. Awesome deals plague this page
Thank you! I hope someone who has the ability and feels the same as you--if not you--> buys it...
-
Front mount GSP 31"x12"x3" inter-cooler, 3"polished aluminum piping, stainless steel clamps,blue high temp. silicone couplers, BOV, Waste Gate, *All new electronic GodSpeed products in box unopened: Oil pressure gauge, Oil temp gauge,Boost gauge, 255 fuel pump, fuel pressure regulator, air fuel ratio gauge, and a APEXI Turbo timer.
SOLD.
$200 cash
AEM Tru Boost Contoller
SOLD.
$250 Cash
GT35 GodSpeed Turbo .68/.70
Included-t3 to t4 adapter-new
fitted for this turbo-3" polished stainless steel down pipe
SOLD.
$200 cash:
M42/E30 Stainless steel OBX Turbo Header T3 flange with solid professional 1" extensions added for clearance from valve cover
New gasket included
SOLD.
-
bump.
-
bump.
-
bump.
-
bump.
-
bump.
-
OBX turbo header is SOLD.
Thank you Matt from Florida!
-
This is my first post on this forum, and I'm very glad to say (maybe even tickled pink) that i purchased the turbo manifold last night and could not be more happy about the prompt response. Not to mention the price and shipping with a tracking number within 12 hours time. My hats off to you JohnHenry, thank you kindly good sir!
-
This is my first post on this forum, and I'm very glad to say (maybe even tickled pink) that i purchased the turbo manifold last night and could not be more happy about the prompt response. Not to mention the price and shipping with a tracking number within 12 hours time. My hats off to you JohnHenry, thank you kindly good sir!
I know from personal experience how some sellers take too much time getting items shipped... Glad someone else is going to put the OBX turbo header to use! Thank you for your purchase and positive feedback!:)