M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => General Topics => Topic started by: josephb983 on January 19, 2012, 12:30:50 AM

Title: speedometer problem
Post by: josephb983 on January 19, 2012, 12:30:50 AM

I have replaced SI batteries, and reflowed all the solder joints on the SI board, and back of speedometer. No avail, the speedometer will not work on acceleration, only after I release the gas.

Title: speedometer problem
Post by: rjcaptsean on January 20, 2012, 09:21:58 AM

Sounds like when the torque changes, there might be a loose wire/connection that is pulling loose.  Have you checked the wires going back to the Diff housing and the sensor clip back there?