M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Electrical => Topic started by: ak96ss on November 01, 2006, 07:25:14 PM

Title: Today's project
Post by: ak96ss on November 01, 2006, 07:25:14 PM

Today I started to install the Heizgerat Setzt II seat heaters...  I'll have a full write-up when I finish, which will likely be near the middle of the month, as I am going to be at work for just about two solid weeks starting Friday.

If the weather cooperates tomorrow, I should be able to finish the driver's seat and all of the wiring.  Otherwise, I'm SOL until the 13th at the earliest.

Here's a teaser pic.

Title: Today's project
Post by: bmwman91 on November 01, 2006, 11:04:12 PM

Sweet, keep us posted.  This would be a very nice addition, not that I need it here in CA.....

Title: Today's project
Post by: D. Clay on November 01, 2006, 11:16:18 PM

Nor in Texas. Off-topic but I have a pair of professional hog ring pliers and a baggy of rings if anybody needs them. Paid $30. Will let go for $10.

Title: Today's project
Post by: ak96ss on November 02, 2006, 10:36:19 AM

Quote from: D. Clay;13167

Nor in Texas. Off-topic but I have a pair of professional hog ring pliers and a baggy of rings if anybody needs them. Paid $30. Will let go for $10.

I *knew* I should've checked here first - I just this morning ordered hog ring pliers and rings from Eastwood...  damn.

Are they straight or bent nose?  If they are straight, I'll take them!