M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Electrical => Topic started by: bmwman91 on December 19, 2010, 04:22:23 AM

Title: How-To: Install An Omega REC-43T Keyless Entry Module
Post by: bmwman91 on December 19, 2010, 04:22:23 AM

Zoso's how-to is great, and to the point. My installation is a little different, so I figured that I would write my own how-to to compliment it. Take a look!

http://bmw.e30tuner.com/articles_rec43t.php

I also installed one of the most overpriced pieces of silliness the other day, and wrote a little how-to for it as well.
http://bmw.e30tuner.com/articles_illknob.php

Enjoy!

PS
I got some extra modules because I accidentally clicked the "submit order" button twice. $30 shipped each within the lower 48...

Title: How-To: Install An Omega REC-43T Keyless Entry Module
Post by: romeomike on December 19, 2010, 11:39:25 AM

Thanks for the write-up. When I did this on my 91 318i, I put the control module in the battery box. If I ever decide to add this to my son's 90 325i vert, I'll do it your way.

Merry Christmas,

RM

Title: How-To: Install An Omega REC-43T Keyless Entry Module
Post by: mr ilia on June 20, 2011, 03:51:10 PM

Used your write up and it was huge help! I did it on the 1st attempt. Works great. Many thanks for your contributions to this community.

Title: How-To: Install An Omega REC-43T Keyless Entry Module
Post by: nanotech9 on June 27, 2011, 10:01:05 AM

I just saw this lastnight... my driver door lock finally busted a few years ago so i put the order in on ebay.  $30 total for keyless entry sounds like a sweet deal.

Title: How-To: Install An Omega REC-43T Keyless Entry Module
Post by: SimplyDope on July 01, 2011, 12:56:31 AM

You will love it.

Title: How-To: Install An Omega REC-43T Keyless Entry Module
Post by: nanotech9 on July 01, 2011, 02:16:51 PM

all done!  yay.

i'm pretty sure that if i use the output from the blue wire, run it to a simple relay, and connect the output of the relay to the left and right blinker wires, i can get the hazard lights to flash... i'll report back if i try it and have any luck.