M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => General Topics => Topic started by: littleboyblues on December 12, 2010, 09:10:37 PM

Title: Problem that I fear cannot be fixed...
Post by: littleboyblues on December 12, 2010, 09:10:37 PM

I took my door off today to get at some rust that was building in the hinge. The lower hinge was seized so i got the torch out and gave a heat up and it came out quite nicely. Only problem is that in the hinge theres a sleeve made out of some fiber stuff that came out with the hinge. The rust had messed it up bad. Is there any way i can get a replacement sleeve and install it into the hinge because other wise my door will be totally messed. Unfortunately this sleeve came out of the side of the hinge thats welded to the car so...i cant just junkyard another hinge part.

Help?

Title: Problem that I fear cannot be fixed...
Post by: DesktopDave on December 13, 2010, 07:26:28 AM

There is a repair kit out there, just the sleeve, pin & bolt.  I lost my link, might have been ECS selling it?  I'll find it & post it.  The BMW dealer might have a kit too, they weren't expensive IIRC.  Maybe $20?

Title: Problem that I fear cannot be fixed...
Post by: littleboyblues on December 13, 2010, 08:24:19 AM

Thats good to hear. I'll keep my eyes open too.

Thanks Dave

Title: Problem that I fear cannot be fixed...
Post by: littleboyblues on December 13, 2010, 08:26:46 AM

http://www.m42club.com/forums/showthread.php?t=11015

for starters...

Title: Problem that I fear cannot be fixed...
Post by: DesktopDave on December 13, 2010, 08:55:24 AM

Found it...parts look-up works but navigating via model is difficult.

http://www.ecstuning.com/BMW-E30-318i-M42_1.8L/Search/41_51_1_922_737/ES72233/

Title: Problem that I fear cannot be fixed...
Post by: littleboyblues on December 13, 2010, 10:52:11 AM

wow thanks