M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Engine + Driveline => Topic started by: Appletree IS supercharged on November 04, 2010, 01:56:12 AM
-
Hi, could anyone with a M42 in bits have a look in the top of the block and see if there is parts 9 and 10 in it for me? ive ordered them but when i came to fit them they are the wrong size, and it looks like the one bmw sent would press in were as my block seams to be tapped around M8/M10 i would say.
heres link
http://www.realoem.com/bmw/showparts.do?model=AF92&mospid=47256&btnr=11_4380&hg=11&fg=10
Any help would be much appreicated, ive check a spare block i have but it has no valve in it.
-
it was only in the e36
-
I had my (E30) block machined to accept it part, and customized the rubber seal to make it all work.
-
Thanks for the quick reply guys, saved me wipping the head off!
Hi Rob why did you go to the effort of fitting it? not knocking what you have done, just intrested.
ta matt
-
It's a check valve that keeps oil in the head after shut down.