M42club.com - Home of the BMW E30/E36 318i/iS
PAPER OR PLASTIC => For Sale => Topic started by: jrw21 on August 13, 2010, 02:59:10 PM
-
By the way if anyone is interested the hardware part#'s from mcmaster car:
93805A333
94205A250
90965A170
95211A160
94639A503
91287A137
ALL New kits have been sold. Thanks everyone!
Hey guys I decided to make myself a coil on plug conversion kit and ordered enough material to make a few more for you guys. This is a full kit with a 6061aluminum coil bracket, guality MCMASTER-CARR stainless steel hardware, and coils.
$145 gets you the whole setup to your door. lower 48 shipping is included. Like I said, I don't plan on making anymore of these just passing on a few kits to you guys at a low price. This price barely covers material/machining, shipping, and paypal fees.
Thanks!
(http://img.photobucket.com/albums/v83/whitebred21/100_2899.jpg)
(http://img.photobucket.com/albums/v83/whitebred21/100_2823.jpg)
-
Please forgive my ignorance: What's the advantage(s) of coil on plugs?
Thanks, Yeti
-
The biggest advantage is it eliminates the need for spark plug wires and as the names suggests places the coils directly on top of the spark plugs. I am not sure if you have ever replaced the wires on an m42 but the wires alone are ~$130. So, if you need a tune up you might as well switch over to coil on plugs like the m42's big brothers m50, m52, and s52...etc..
The other advantage is that it cleans up your engine bay significantly. Allowing room for other things like F/I... Or simply a clean modern look.
-
not questioning your skills or nuthin but have you built these b4 and will these have a warranty.how do u expect payment to be made if i am interested
-
I take paypal payment. Basically the coils are the only item on this kit that could fail and I don't seem to hear of any problems from anyone of coils ever failing. The hardware is stainless steel so rusting will not be an issue. Let me know if you are interested in a kit and I will ship out on monday. I have been running these coils and bracket in my car for a few thousand miles or so with no issues. Actually it was a bit more perky after the swap, however, my wires were quite old.
-
Do you have kits ready to ship? How long would shipping take?
-
Yes, I have the full kits ready to ship. Not sure where you are but I am shipping them usps priority mail which is generally 2-3 days.
-
Are those OEM coils and what are they off of?
Thanks!
-
They are aftermarket coils. There wasn't an "OEM" coil for the m42 that fit on the plugs.
-
They are aftermarket coils. There wasn't an "OEM" coil for the m42 that fit on the plugs.
I believe that the factory coils were from M52's and S52's. Not 100% sure though...
-
Just ordered! Can't wait to install this finally.
-
Received your payment. Will ship your kit out today. Thanks.
-
Just installed! I found a 9HP increase! WOOT!
http://m42club.com/forums/showthread.php?p=95813#post95813
-
will you sell just a bracket? how much?
-
Just installed! I found a 9HP increase! WOOT!
http://m42club.com/forums/showthread.php?p=95813#post95813
Glad to hear, thanks for posting the results! My m42 perked up quite a bit after the conversion as well. I aslso noticed a much smoother engine throughout the entire rpm range.
-
will you sell just a bracket? how much?
Sorry, I have an equal number of brackets in relation to the coils and bolts. If I planned on making more brackets I would sell just one. But, at this time I am not planning on running another batch.
-
do you still have thease?
-
yes sir, ready to ship.
-
bump
-
hello
will you ship it to jakarta, indonesia?
how much for shipping cost via usps mail service?
please quote me with pm
thanks,
-
bump
-
I'll take a set. Email me at
gbinc@comcast.net
Thanks,
Scott
-
I'll take a set. Email me at
gbinc@comcast.net
Thanks,
Scott
Shipped out today. Thanks.
-
bump
-
Bumtp, I have a few kits left.
-
bump
-
Still have some kits for sale.
-
Total cost, including shipping to Edmonton, Alberta, Canada?
-
Total cost, including shipping to Edmonton, Alberta, Canada?
Sent you a pm, Thanks.
-
How many do you have left?
-
How many do you have left?
I have five kits left.
-
I would also like a set please email me ethirtybmw@yahoo.com Thanks Brandon
-
I would also like a set please email me ethirtybmw@yahoo.com Thanks Brandon
Email sent. Thanks!
-
how much are these again?
-
how much are these again?
The kit is $145 shipped.
-
i'll take one. nice looking kit. could you send me a paypal invoice? woof132@hotmail.com
thanks
-
i'll take one. nice looking kit. could you send me a paypal invoice? woof132@hotmail.com
thanks
Invoice sent, thanks.
-
do it come with instructions i am a novice.thx
-
do it come with instructions i am a novice.thx
Yes sir, instructions with a diagram. Very easy install shouldn't take a novice more than 30-45 minutes to complete.
-
payment sent and cleared. don't know why paypal sent an e-check instead of an instant payment. anyway, any update on shipping?
-
Yep, I just noticed it cleared. I have your kit boxed up ready to ship. Thanks!
-
only two kits left.. get them before they are gone.
-
only two kits left.. get them before they are gone.
got my kit the other day, installed flawlessly (aside from me not being able to find my 10mm deep socket) and works great. Once i get my wiring cleaned up i'll post an after shot. good kit, good seller :-)
-
got it. really nice kit. will post a pic when installed. Thanks!
-
Glad you guys got your kits! Now lets see some pics!
-
I really want one of these. Have to see where my money situation ends up but how many do you have left? Where should I send paypal to? If you'd like to PM me with this info you can as well
-
Are you ever just going to sell the bracket
-
Are you ever just going to sell the bracket
Not planning on it, If I sold a bracket I would have extra coils left over.
-
1 kit left!!!
-
My paypal is sent! Somebody grab this last one up!
-
My paypal is sent! Somebody grab this last one up!
payment received. Who wants my LAST kit!!??
-
for now the wiring i will leave as is, until i figure out a better way of routing.
the kit is real nice. in general my M42 is smoother all around, a worthwhile upgrade.
(http://stevedu.com/fspics/copkitinstalled.jpg)
-
PM sent
Has anyone gotten the cover to fit back over the coils? Or has anyone made something to go over them?
-
Nice Kit!! big improvement all throughout the rev range. Definitely more stable and smoother while accelerating and idling. Thanks!
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1148.snc4/149043_787489008666_11516065_42878450_7809873_n.jpg)
-
Nice Kit!! big improvement all throughout the rev range. Definitely more stable and smoother while accelerating and idling. Thanks!
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1148.snc4/149043_787489008666_11516065_42878450_7809873_n.jpg)
Nice bay!!!!!
-
The instructions that come with this are very detailed but any chance anyone took pictures for a walk through when they did this?
-
Bump to reuse an old thread! I have one used COP kit. This was mine my kit i used for quite awhile. Details on page 1.
-
How much are you asking for your kit?
-
The used kit - $50 for everything in the picture
-
sounds good, sent a pm
-
oh i know im too late but....is anything still available ?
-
try these guys, pretty sure they're on the forum. Got my COP kit from them.
http://www.hqautosport.com/products1.html (http://www.hqautosport.com/products1.html)
here is their thread on the site:
http://www.m42club.com/forum/index.php?topic=9122.390 (http://www.m42club.com/forum/index.php?topic=9122.390)
-
Yes, I only put together a few kits when I had mine machined. I sold my personal kit just a bit ago when I moved to ms3pro.
Try HQ Autosport. They are still putting them together.