M42club.com - Home of the BMW E30/E36 318i/iS
PAPER OR PLASTIC => For Sale => Topic started by: nickmpower on June 17, 2010, 10:27:21 PM
-
ALright i am moving at the end of the month so i need this stuff gone. Everything is available for pickup for a discount in santa clara next to SCU. You can make me offers but i feel that my prices are pretty damn low
E36 pulley needed for putting a 93 dasc kit on the e30
$30 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01579.jpg)
e36 fuel rail and injectors, unknown mileage, the rail is needed for dasc install
$30 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01589.jpg)
e36 air intake boot new, needed for dasc install
$35 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01583.jpg)
OR $75 shipped for the above parts
e36 DME, has been opened but has the stock chip
$25 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01594-1.jpg)
E30 v belt water pump pulley
$8 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01593-1.jpg)
DASC rising rate fuel pressure regulator and aftermarket adjustable regulator with gauge, dont know the brand.
$50 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01598.jpg)
E30 alternator, less than 70k miles
$60 shipped or 35 picked up
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01596.jpg)
e30 intake mani, painted with VHT brake caliper paint, paint is not prefect
$50 shipped or 25 picked up
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01591.jpg)
e36 idle control and pcv valve.
$20 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01590.jpg)
e30 fuel rail
$25 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01587.jpg)
e30 airbox, filter is nearly new
$20 picked up
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01584.jpg)
e36 throttle body
$30 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01582.jpg)
e36 AFM, some gouging at the end, unknown milage
$25 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01581.jpg)
e30 lower intake mani
$35 shipped
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01580.jpg)
e30 brake calipers with brackets 137k miles, switched to wilwoods
$30 shipped or $20 shipped each
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01578.jpg)
e30 ATE powerslot brake rotors AND axxis ultimates pads. There is some surface rust from being in the garage. About 2k miles of use
$55 shipped, or $40 shipped for rotors and $20 shipped for pads
(http://i770.photobucket.com/albums/xx344/nickmpower/DSC01577.jpg)
-
bump
-
I wish I had more money! Great deals.
-
e30 brake calipers with brackets 137k miles
front or rears?
-
fronts, and they dont have the brackets my bad
-
What about the DASC?
-
its on my car! the kit was a later model from a 95 so i had to use different parts
-
its on my car! the kit was a later model from a 95 so i had to use different parts
Never hurts to ask. Thanks!
-
pm'd!
-
where are you located, do you still have the alternator?
-
yeah and I am in oregon
-
still got the afm?? i could use it
pm your info, method of payment, ets
thanks,
jake
-
Wish I lived a bit closer I would have the boot from you :mad:
-
Also interested in the brake calipers if they are fronts. Could you shoot me an email at ksmorrin@msn.com and let me know if they are available? I'm not on this board very often and I've got a serious need for a right front caliper.
Thanks, Gerta