M42club.com - Home of the BMW E30/E36 318i/iS
PAPER OR PLASTIC => For Sale => Topic started by: SiGmA_X on June 07, 2010, 03:47:45 PM
-
All parts have ~195k on them. Parts are pretty greasy in pictures they will be hit with a pressure washer and lightly oiled after to prevent oxidation/rust. If you desire sandblasting, it can be done at a fee but be aware that its a slow process and will be charged for accordingly.
M42 cylinder head 8 bent valves, slipped timing chain, no apparent cracks - $50 + SH
M42 short block Block, timing chain case, pistons, rods, crank, rear main cover included cold head-off leakdown showed an even ~15% after the motor had been sitting for 2yrs+ - $200 + SH
M42 upper oil pan $45 + SH
M42 oil filter housing $30 + SH
M42 valve cover $45 + SH
M42 spark plug wires $40 + SH
M42 factory coil pack Shows minor rust $30 + SH
M42 upper & lower intake manifold $50 + SH
M42 throttle body $35 + SH
M42 lower timing cover $25 + SH
M42 upper timing cover $20 + SH
M42 factory header $40 + SH
M42 AC bracket $25 + SH
M42 thermostat housing $10 + SH
M42 alternator $30 + SH
M42 starter - $30 + SH
(http:// http://lh4.ggpht.com/_mqMVDO-PUfY/TA0IQrEAECI/AAAAAAAAFlA/I6VzSr_koi4/s576/IMG_1895.JPG)
(http:// http://lh3.ggpht.com/_mqMVDO-PUfY/TA0IRMlRCjI/AAAAAAAAFlE/stVtWHJMMeo/s576/IMG_1896.JPG)
(http://lh6.ggpht.com/_mqMVDO-PUfY/TA0IRejn5KI/AAAAAAAAFlI/faRZfcKclMI/s576/IMG_1897.JPG)
-
interested in the head if you still have it
-
I have it. I can get some pictures of it this afternoon. It appears fine, short of some bent valves. PM me.
-
how much for the power steering pump needed in the UK cheers
-
Oil pans shipped to 29730?
-
ill take the head shipped to 90715 have cash pr pay pall
-
Is the lower timing cover both the inner and outer?