M42club.com - Home of the BMW E30/E36 318i/iS

PAPER OR PLASTIC => For Sale => Topic started by: KidneyBoy on June 07, 2010, 02:46:02 PM

Title: Feeler: M47 crank, bored block, rebuilt head
Post by: KidneyBoy on June 07, 2010, 02:46:02 PM: I have had a project engine for some time, but i dont think i will ever get around to building it [time, money]

M47 crank [88mm throw] Machined snout.
Bored block, 86mm, cleaned and ready to go
S50 Pistons, 6 included, 4 are good.
M50 Piston rods
Rebuilt head, lapped valves polished intake and exhaust.
M42 headgasket set w/ bolts included

I can get more pics, these are what I have uploaded at the moment.

I have about $2000 invested, looking for $1700 shipped inside the lower 48, located in Columbus Ohio

(http://www.r3vlimited.com/gallery/files/1/1/0/4/7/dsc_0017.jpg)

(http://www.r3vlimited.com/gallery/files/1/1/0/4/7/dsc_0016.jpg)

(http://www.r3vlimited.com/gallery/files/1/1/0/4/7/dsc_0014.jpg)

(http://www.r3vlimited.com/gallery/files/1/1/0/4/7/dsc_0018.jpg)

(http://www.r3vlimited.com/gallery/files/1/1/0/4/7/dsc_0010.jpg)

robo-grip not included.

Please email me - joe31891@gmail.com
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: KidneyBoy on June 07, 2010, 02:52:09 PM: I also have an singlemass conversion, clutch has around 5,000 miles. Will include M20 starter, you can disassemble and remove pinion.

$150 plus shipping
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: bwawuz02 on June 08, 2010, 10:28:08 AM: Oh how I wish I was still home in Indiana, i'd be driving to ohio this weekend ;)

Quote from: KidneyBoy;93336
I also have an singlemass conversion, clutch has around 5,000 miles. Will include M20 starter, you can disassemble and remove pinion.

$150 plus shipping

people should realize that it's just as easy, if not easier, to swap the ring gear from their stock flywheel onto the M20 flywheel.
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: mderienzo on June 08, 2010, 07:31:42 PM: Quote from: bwawuz02;93364
Oh how I wish I was still home in Indiana, i'd be driving to ohio this weekend ;)

people should realize that it's just as easy, if not easier, to swap the ring gear from their stock flywheel onto the M20 flywheel.

Or just use an M20 starter with the M20 flywheel (if you have the M20 starter already)

Mark
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: jakeb on June 08, 2010, 08:01:09 PM: oh man this is tempting....
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: Warsteiner on June 08, 2010, 09:08:26 PM: KidneyBoy you do mean M44 HG right? Don't think the M42 will fit:confused:
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: KidneyBoy on June 08, 2010, 10:08:28 PM: nope, its the M42 head gasket SET. For things like intake manifold gaskets, exhaust manifold gaskets, valve cover gasket, valve stem seals [already installed]. yes you would need an m44 head gasket, or even a custom head gasket since the m44 gasket is still too small.
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: Warsteiner on June 08, 2010, 10:23:06 PM: Ok Kool...the M44 headgasket does fit with room to spare:) because I used it with S50 pistons.

~Ralph
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: jscribble on June 12, 2010, 10:23:59 PM: I wish I could justify this. I really, really do. It's on the project list, but not enough funds to start a fire in my pocket yet.
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: Hybrid775 on June 13, 2010, 03:25:42 AM: nicely done...wonder how much torque this generates.
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: Tor Arne Kaasen on August 07, 2010, 02:26:36 AM: Hi ther, do you hawe the s50 pistons for sale, ?
Is it poseble to sell them to me, live in norway.
Are those 22mm pins and 86bore?
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: 91318radmobile on August 07, 2010, 10:22:12 AM: if you ending up parting this thing out i need a good head
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: KidneyBoy on August 12, 2010, 04:14:02 AM: Its being parted, please email me at Joe318 gmail

I dont check this forum
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: KidneyBoy on August 16, 2010, 09:39:49 PM: bump

crank and block sold
Title: Feeler: M47 crank, bored block, rebuilt head
Post by: dakon on August 20, 2010, 11:22:52 PM: do you still have the clutch stuff, i am VERY interested, can you post pictures if you do? Do you have Everything needed?

Thanks