M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Suspension => Topic started by: Ivan Petrov on April 17, 2010, 04:29:03 PM

Title: Free Strut Brace
Post by: Ivan Petrov on April 17, 2010, 04:29:03 PM

:) Let`s take a look at what I did today... ( I know that it`s crap but don`t forget that it`s free :D )

Everything started from this
(http://drifting-bg.com/strut/1.jpg)
(http://drifting-bg.com/strut/2.jpg)
Some imagination
(http://drifting-bg.com/strut/3.jpg)
Cleaning from rust
(http://drifting-bg.com/strut/4.jpg)
There is awlays first time :D
(http://drifting-bg.com/strut/5.jpg)
... and maybe last :D
(http://drifting-bg.com/strut/6.jpg)
Protecting my frankenstein strut brace from rust
(http://drifting-bg.com/strut/7.jpg)
Let`s see does it even fit :confused:
(http://drifting-bg.com/strut/8.jpg)
And finally
(http://drifting-bg.com/strut/9.jpg)
(http://drifting-bg.com/strut/10.jpg)

Title: Free Strut Brace
Post by: Ryann on April 17, 2010, 07:45:50 PM

I think you MIGHT need to adjust your wire feed rate.

Title: Free Strut Brace
Post by: Ivan Petrov on April 19, 2010, 11:03:29 AM

(http://drifting-bg.com/strut/11.jpg)