M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Engine + Driveline => Topic started by: fayjai on April 09, 2010, 02:29:58 PM

Title: Thermostat stuck?
Post by: fayjai on April 09, 2010, 02:29:58 PM

Just finish replacing all the hoses underneath the intake, now trying to bleed the system but no coolant seems to bypass the radiator hoses (remains cold).  I am under the assumption that the radiator is stuck closed?  I may have reverse the coolant temp sensors connected to the block but even then, coolant should flow correct?

Any help greatly appreciated, need the vehicle running asap.

Title: Thermostat stuck?
Post by: Phreon on April 11, 2010, 03:40:00 PM

Are you overheating?

You can test the thermostat by dropping it in a pot of water on your stove. It should open just before boiling.

P