M42club.com - Home of the BMW E30/E36 318i/iS

PAPER OR PLASTIC => For Sale => Topic started by: redhead on March 12, 2010, 08:30:13 PM

Title: Much <1995 BMW content - check it out
Post by: redhead on March 12, 2010, 08:30:13 PM

I have a couple of things which I want to get rid of, I am a little flexible on price.

- e30 RH Bosch euro ellipsoid low beam which has the built in running light, comes with the frame, glass in excellent shape doesn't include the high beam as pictured. It is the bottom left light in the link below. $55
http://i232.photobucket.com/albums/ee21/me6j/IMG_0411.jpg
http://i232.photobucket.com/albums/ee21/me6j/IMG_0280.jpg

- e30 LH ellipsoid foglight post facelift, comes with the mounting bracket and the lense is in very good condition $35
http://i232.photobucket.com/albums/ee21/me6j/IMG_0972.jpg

- Beru and Bremi ignition wires for the 318is/M42 in very good shape here's a picture of one set $25 each set
http://i232.photobucket.com/albums/ee21/me6j/108-0809_IMG.jpg

- 318is/M42 AFM comes with the top of the airbox $25
http://i232.photobucket.com/albums/ee21/me6j/IMG_0284.jpg

- 19lb injectors x6 out of a 1991 735i e32, one of the injectors need a new pintle cap, car ran beautifully when pulled, cleaned and ready to go $25/set

- M20 starter, I think it doesn't work but it may as I haven't tried. I bought it for the pinion gear to do the lightweight flywheel conversion on my M42. $10
http://i232.photobucket.com/albums/ee21/me6j/parts%20for%20sale/IMG_1583.jpg

- wheel lock set, should fit most BMW's $10
http://i232.photobucket.com/albums/ee21/me6j/parts%20for%20sale/IMG_1585.jpg

- wheel lug nuts $1 each
http://i232.photobucket.com/albums/ee21/me6j/parts%20for%20sale/IMG_1585.jpg

- Lemforder LH & RH tie rods brand new in the box fits e24 (M6), e28, e32, e34, e31 paid $35 each ; asking $17 each
http://i232.photobucket.com/albums/ee21/me6j/parts%20for%20sale/IMG_1584.jpg

- m20 head gasket set  I am selling a 80% complete M20 head gasket set.

The following gaskets have been used and will not be included:

- exhaust manifold -> head gasket
- cam cover
- thermostat housing
- upper timing chain cover
- throttle body gasket

What also is included is an:

- oil pan gasket
- rear crank housing seal gasket - paper & metallic
- rear engine seal
- extra camshaft/intermediate shaft seal

If ordered from BMA the head set alone will cost you ~$90 + the bottom end gaskets worth ~$26 if bought separately. But, being that it is missing some of the gaskets in the head set I am asking $70 for everything.
http://i232.photobucket.com/albums/ee21/me6j/m20headset.jpg

- m30 Fel-Pro head gasket set new sealed in the box; new costs $225USD + shipping - sell for $135
http://i232.photobucket.com/albums/ee21/me6j/IMG_0290.jpg
http://i232.photobucket.com/albums/ee21/me6j/IMG_0293.jpg

- M42 flywheel from a 1991 318is e30 $30

If you have any questions please don't hesitate to ask or PM me. Thx!http://

Title: Much <1995 BMW content - check it out
Post by: Warsteiner on March 12, 2010, 09:10:24 PM

Where are you located?

Title: Much <1995 BMW content - check it out
Post by: redhead on March 12, 2010, 09:15:54 PM

I am located in Vancouver, B.C. CANADA but often ship out of Washington State to make shipping affordable for the buyer.

Title: Much <1995 BMW content - check it out
Post by: redhead on March 14, 2010, 01:27:26 PM

I also have an oil pan & oil level sender off of an e28 528e M20b27 - offers?

Title: Much <1995 BMW content - check it out
Post by: redhead on March 18, 2010, 07:55:54 PM

ttt

Title: maf
Post by: garagetoosmall on March 20, 2010, 08:08:09 PM

hi - need an afm for my '95 m42 - how much shipped to NJ (08502)?  thx Scott

Title: thumbs down
Post by: garagetoosmall on March 20, 2010, 08:13:28 PM

by the way - only m42 club seems to think my pc spews spam - if it is useful,. the old box has been retired and this is a new one (geesh...)

Scott