M42club.com - Home of the BMW E30/E36 318i/iS

PAPER OR PLASTIC => For Sale => Topic started by: dude8383 on March 09, 2010, 11:29:06 PM

Title: FS: USED RX-7 Calipers
Post by: dude8383 on March 09, 2010, 11:29:06 PM

Got a set of RX-7 calipers that I won't be using b/c I purchased Massive's street kit. My original intention was to get the adapters that 2002maniac made but a good deal came up.

I going to throw these up for $85 shipped to the 48 states.

(http://lh3.ggpht.com/_wyi3Rqkw7No/S5XbC45CgJI/AAAAAAAABJQ/Qe8NXEWe9Lo/s800/IMG_2957.JPG)

(http://lh4.ggpht.com/_wyi3Rqkw7No/S5XbCwszp4I/AAAAAAAABJU/Mh9iwrk5w20/s800/IMG_2958.JPG)

(http://lh5.ggpht.com/_wyi3Rqkw7No/S5XbDfxadzI/AAAAAAAABJc/5ao2MxBiaH8/s800/IMG_2962.JPG)

(http://lh5.ggpht.com/_wyi3Rqkw7No/S5XbDSQauaI/AAAAAAAABJg/BM0tCFQxju4/s800/IMG_2963.JPG)

(http://lh3.ggpht.com/_wyi3Rqkw7No/S5XbJVz4mZI/AAAAAAAABJk/pQYdYWWBdjI/s800/IMG_2964.JPG)

(http://lh3.ggpht.com/_wyi3Rqkw7No/S5XbJji70XI/AAAAAAAABJo/grztaOnLTCg/s800/IMG_2965.JPG)

(http://lh6.ggpht.com/_wyi3Rqkw7No/S5XbJqGujgI/AAAAAAAABJs/jDtWlvruOn4/s800/IMG_2966.JPG)

(http://lh4.ggpht.com/_wyi3Rqkw7No/S5XbJ7oD1-I/AAAAAAAABJw/34HKJTrgAd8/s800/IMG_2967.JPG)

Title: FS: USED RX-7 Calipers
Post by: brandon450 on March 10, 2010, 06:06:04 PM

Can you still use the abs sensors?

Title: FS: USED RX-7 Calipers
Post by: dude8383 on March 10, 2010, 06:56:36 PM

Quote from: brandon450;89233

Can you still use the abs sensors?

Yep, the caliper bracket doesn't affect the abs sensor at all.

http://www.e30tech.com/forum/showthread.php?t=83511

Title: FS: USED RX-7 Calipers
Post by: dude8383 on March 11, 2010, 09:34:26 PM

bump

Title: FS: USED RX-7 Calipers
Post by: dude8383 on March 13, 2010, 03:23:53 PM

bump

Title: FS: USED RX-7 Calipers
Post by: dude8383 on March 21, 2010, 10:42:50 PM

bumping up again...might be putting this on ebay soon.

Title: FS: USED RX-7 Calipers
Post by: dude8383 on April 22, 2010, 01:14:07 PM

up...

Title: FS: USED RX-7 Calipers
Post by: BlueBMW on April 22, 2010, 06:39:51 PM

Two questions, what bracket modification is necessary to make these fit... and do these fit inside stock 14" weaves?