M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Swaps, Turbos, Buildups => Topic started by: Dziku on February 20, 2010, 11:04:02 AM
-
I need advice. I've got some pretty 86mm pistons, but they are flat.
What CR i should expect with 90mm m47tu crank and m50 135mm rods?
An how deep should i do cutouts for valves?
Ah, copression height of them is 32.5mm.
Can anyone help me with this?
Sorry for bad english.