M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Engine management => Topic started by: persianbmw on January 30, 2010, 12:46:31 PM

Title: bin file with eprom reader
Post by: persianbmw on January 30, 2010, 12:46:31 PM

anyone have a detailed write up on how to pull the bin file off a chip with an eprom reader

Title: bin file with eprom reader
Post by: DesktopDave on January 30, 2010, 04:43:06 PM

I was thinking about setting one up, but my budget got slashed.  I'll post if I get anything.

Editing will be the bigger problem, I suspect.

Title: bin file with eprom reader
Post by: persianbmw on January 30, 2010, 11:05:37 PM

i dont really need to edit i just have to find a idiot proof way of pulling the file and sending it to a tuner so theyll write me a chip since my dme isnt currently supported and i need it asap.

Title: bin file with eprom reader
Post by: DesktopDave on January 31, 2010, 09:37:07 AM

Finding someone with an EEPROM chip reader would be difficult.  I'm thinking a lot of coders should have one.  Find an LS1 guy maybe?

Title: bin file with eprom reader
Post by: persianbmw on January 31, 2010, 06:56:47 PM

i dont need help finding the reader i need a faq on how to get the files i need off my chip using the reader.

Title: bin file with eprom reader
Post by: ecuconnections on January 31, 2010, 09:26:12 PM

I take it you got the eprom reader I suggested ?

Title: bin file with eprom reader
Post by: persianbmw on February 01, 2010, 11:08:06 AM

not yet i wanted to make sure i would be able to use it before i buy it. id dont want to dick around with my ecu till im 100% on what im doing.

on a side note bears do you know if i can just pop in another 318i ecu which is more common? or is the engine mated to the ecu so as to not allow that.

Title: bin file with eprom reader
Post by: DesktopDave on February 01, 2010, 12:31:58 PM

Do you have an e36?  You can't easily swap a DME/ECU unless you get a dealer (or coder) to realign it to the car.  No such trouble on the e30.

Title: bin file with eprom reader
Post by: persianbmw on February 01, 2010, 03:43:06 PM

yeah im e36 93 engines a 94

Title: bin file with eprom reader
Post by: persianbmw on February 06, 2010, 08:35:56 PM

anyone? diy on bin extraction

Title: bin file with eprom reader
Post by: nickmpower on February 06, 2010, 08:53:57 PM

use tunerpro

Title: bin file with eprom reader
Post by: ecuconnections on February 07, 2010, 11:51:56 AM

Quote from: persianbmw;86832

anyone? diy on bin extraction

My friend what hardware are you using to extract the bin file??