M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Engine + Driveline => Topic started by: ClubSport on August 14, 2006, 06:31:10 PM

Title: Impedance of stock injectors?
Post by: ClubSport on August 14, 2006, 06:31:10 PM

What is the impedance of our injectors? High/Low?

Does anyone know the stock flow rate?

Thanks!

Title: Impedance of stock injectors?
Post by: bmwman91 on August 14, 2006, 06:52:00 PM

16 Ohm.  High.

Stock the rate is 20.5 lb/hr.

What are you looking at doing?  Sounds like either a stand-alone or bigger injectors for someone....

Title: Impedance of stock injectors?
Post by: ClubSport on August 15, 2006, 11:55:11 PM

Hi, and thanks.  I'm going to be using a PCIII and Shawn Fogg's writeup here http://ackthud.com/shawnfogg/fuelupgrade.htm to get some 36 lb/hr injectors running on my ti.  Going to put on a 9psi pulley and see where that gets me.