M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Engine + Driveline => Topic started by: Royalratch on January 06, 2010, 07:58:54 AM
-
I recently deleted the throttle heater plate on my car, more for the simplified vacuum tubing than the mythical BHP increase.
I seem to have these left over:
1 AFM-type Connector
(http://farm3.static.flickr.com/2776/4250368427_cf54917318.jpg)
And this. This has fuel coming from it on start, I believe it's some kind of breather/vent tube? Some owners have fitted a small filter on the end if I'm not mistaken. All fuel lines are where they're supposed to be. The car runs perfectly. What's supposed to happen with this?
(http://farm3.static.flickr.com/2769/4251142448_62176c8c07.jpg)
-
The wiring connector looks like a coolant temp sensor, but it's in the wrong place. Let me look at my car to see.
That tube might be the vac canister breather. Is there a black can in the front fender well behind the headlights?
-
For the first picture, under the power steering fluid should be a charcoal canister mounted to the body. On mine is has this connector. Not sure about the second pic.
-
1st pic looks to connect to the bottom of the ICV. The 2nd pic looks like the hose for the brake booster but I'm not 100%
-
You guys are right, first plug is for carbon Canister but this is not used in the UK.
Second pic is my main concern tho.
-
Anyone on that second hose?
-
moar pics of the hose
-
Trace the pipe back to its origin and then you can see where it should plug into.
actually, it could be plumbing for the charcoal canister. explains the fuel hose.
-
do your power brakes work?