M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => General Topics => Topic started by: 92BMW318is on December 04, 2009, 05:46:30 PM
-
I was wondering if anyone had a diagram or schematic for the tubing and wireing for a 92 BMW 318is. I recently completely took off the intake manifold and had to disconnect a bunch of hoses and wires with female and male plugs.
It was like an octopus of wires, being the retard that i am for got to label them accordingly. the reason i took off the intake manifold was to replace my starter taking off the manifold was the only way to achieve this, i need tho if anyone has it a wire and hose diagram/schematic. :confused::confused::confused:
-
look at realoem.com, pelicanparts and r3vlimited...
I don't guarantee you will find it...
I'll try to take some pics to post today.
-
I checked out RealOEM and found this nice pic (http://www.realoem.com/bmw/showparts.do?model=CA53&mospid=47490&btnr=12_0624&hg=12&fg=28), but it's not marked. Might help a little though.
Here's the water hoses (http://www.realoem.com/bmw/showparts.do?model=CA53&mospid=47490&btnr=11_1402&hg=11&fg=35) too. There's a better diagram in the 'hose delete mod' thread.
-
pics
ew. They are horrible cell phone pics.
1- starter connections
2-vacuum sensor of some kind...
3- air meter
4- side of fuse box